DM-60 Torch Booster/Refueler

DM-60 Torch Booster/Refueler can fill cylinders and supply high pressure natural gas

Directly to torches, shop manifolds and automated torch equipment.


DM-60 combines the performance of the Refueler 60 Cylinder Filling System and TB-60

Torch Booster in a single cabinet. When filling cylinders DM-60 operates at 1 cubic foot

per minute and can fill from one to four cylinders simultaneously. As a Torch Booster

DM-60 supplies natural gas at up to 25 psi at a flow rate of up to 60 cubic feet per hour.

A built-in regulator lets you set pressure between 1-25 psi on the Torch Booster side.


DM-60 is compact, just 20” wide, 18” deep and 16” tall - it weighs about 100 pounds.

Electrical requirement is 120V 20 amp and there is a 230V 50Hz configuration available,

as well. It is quiet, does not require any special site preparation and can be installed

“anywhere” that is consistent with local codes and regulations for cylinder filling.

The system includes a flexible 5’ hose for connection to the gas pipe and a shutoff valve.

DM-60 should be located in an area where temperatures range between 40F to 90F.


CSA International Certifies DM-60 for performance, reliability and safety. In the United

States it can be operated by anyone who has received proper safety training but does

not require a special license or certificate. Requirements to operate DM-60 may be

different in other countries.


Refueler 60 is CE Compliant for use in European Union countries.

Click here for information about ordering a

DM-60 Refueler / Torch Booster System

DM-60 instructions to change check valve DM-60 instructions to change filter drier

Download a DM-60 Torch Booster/Refueler

Brochure

Download

Instructions for changing the DM-60 check valves

Download

Instructions for changing the DM-60 filter drier

Torch Boosters elevate utility natural gas for direct supply to torches and cutting tables

Adsorbed Natural Gas Cylinders

hold high volumes of natural gas

at only 275 psi

Order a G-TEC

Natural Gas Pressure Booster

How To Install Your

G-TEC System

G-TEC Systems are

Approved across the

US and Canada

Contact G-TEC

if you have questions

Return To The Top Of This Page / Return To The Home Page

Torch Boosters elevate utility natural gas for direct supply to torches and cutting tables

Adsorbed Natural Gas Cylinders

hold high volumes of natural gas

at only 275 psi

Order a G-TEC

Natural Gas Pressure Booster

How To Install Your

G-TEC System

G-TEC Systems are

Approved across the

US and Canada

Contact G-TEC

if you have questions

Return To The Torch Booster Page / Return To The Refueler Page

 DM-60 Refueler/Torch Booster fills cylinders and supplies torches

DM 60 Brochure.pdf