Refuelers let you fill G-TEC cylinders with high pressure natural gas
Torch Boosters elevate utility natural gas for direct supply to torches and burners
Purchase a G-TEC Natural Gas Pressure Booster
How To Install your G-TEC System
G-TEC Systems are Approved across the US and Canada
Torch Applications work better with high pressure natural gas
Contact G-TEC if you have questions
Fill your ownAdsorbed Natural Gas Cylinders from your city gas pipe
Now the advantages of high-pressure natural gas are portable - G-TEC Adsorbed Natural Gas Cylinders let you take 275 psi natural gas anywhere!
G-TEC adsorbed natural gas cylinders have many advantages compared to the cylinder you use today
-
No 15 psi limit - set your torch to draw gas at any psi - natural gas is stable at any pressure
-
No icing problems at high withdrawal rates
-
Standard CGA 510 valve lets you use the regulator you already own
-
G-TEC Cylinders can be transported and used in any position, even lying down
-
Refill your cylinders right from the utility gas pipe whenever supplies run low
-
Anyone can use a Refueler to fill G-TEC Cylinders - no special license or certificate is required
Make your workplace safer
G-TEC Cylinders are safer than acetylene or LPG cylinders - safer than whatever cylinder you use today. During testing full G-TEC cylinders were shot with bullets near an open flame but did not catch fire or explode. Full cylinders were detonated with half stick of dynamite but did not rupture or explode. G-TEC Cylinders reduce the risk of accidents from carelessness or ignorance and make your workplace safer!
Physical Characteristics
G-TEC NG-130 Cylinders hold 130 cubic feet of natural gas and will supply your cutting torch all day.
G-TEC cylinders are built to US Department of Transportation 4B300 and 4BA300 specifications.
Cylinders are 48.5" tall with cap and 12" diameter. Weight depends on Adsorbent Filler and can range between 130-175 pounds.
Cylinders have a female CGA 510 valve with 450 psi spring loaded relief valve and 212F fusible plug. Cylinders are filled with adsorbent activated charcoal.
Maximum working operating pressure is 275 psi.
G-TEC cylinders require a visual inspection by a certified inspector every 10 years in the United States and every 5 years in Canada. No hydrostatic test is required.
G-TEC Adsorbed Natural Gas Cylinders are for industrial torch applications - they are not used for automobiles, trucks, forklifts or other vehicular application.
G-TEC Natural Gas Cylinders are Approved by the US Department of Transportation and Transport Canada
Refuelers let you will G-TEC cylinders with high pressure natural gas
Torch Boosters elevate utility natural gas for direct supply to torches and burners
Purchase a G-TEC Natural Gas Pressure Booster
How To Install your G-TEC System
G-TEC Systems are Approved across the US and Canada
Torch Applications work better with high pressure natural gas
Contact G-TEC if you have questions
